biolene gasspeicher


– flexible gas storage!

Flexible and efficient biogas plant operation is closely connected with the storage of the biogas. Our Biolene® biogas storage membrane is an economical solution for your biogas plant. It is a gas storage and vessel cover in one unit and thus it offers a highly efficient solution for small agricultural and industrial biogas plants.

If the gas storage is not only the storage but also the exterior of the digester roof it must meet high demands for resistance to weather. Our Biolene® meets these high demands. It is made of high-quality EPDM rubber. The material impresses with its UV and ozone resistance, offers high elasticity and long life.

The stored gas volume during operation changes permanently depending on the biogas production, output of the CHPS or due to maintenance and varying gas production. The flexible exterior must adapt and it is lifted or lowered depending on the filling quantity. The consequence with small and flexible gas storages is not only that the CHPS is poorly utilised but biogas must be burnt unused. In view of this, continuous measurement of the filling level is essential. No problem with Biolene®, the filling level is always seen immediately.

The wooden beam ceiling and the planks provide a very big surface for populating with the sulphur bacteria. The gas can be treated cost-efficiently and reliably in this way.

Convincing advantages for optimised gas storage made Biolene® one of the most commonly used biogas storages in Germany.

Biolene® ...

  • allows high CHPS utilisation due to a large gas storage
  • allows filling level check at one glance
  • reduces the costs for economical gas storage
  • offers a very high degree of safety due to reliable sealing with profile seal and pressure monitoring
  • allows height measurement, e.g. for control energy
  • is simple and cost-efficient in installation

DLG FokusTest award

Do rely on experts! The excellent properties of Biolene® were confirmed by a DLG FokusTest. The test focused in particular on "methane permeability and tensile strength at break" (DIN 53504 Tensile strength at break, DIN 53380 Gas transmission rate).

Contact us. We will be pleased to advise you!
Tel.: +49 9826-65959-181
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.


icon pdf Biolene - The Biogas components: Gas store